Event List

Filters
Age Group
Event Type
3d Printer

SLO Library - 3d Printer

Tuesday, July 2, 2024 at 10:00am - 5:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Wednesday, July 3, 2024 at 10:00am - 5:30pm
San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

Event Details:

Please come up to the Children's Area on the 2nd floor of the SLO Library. 

3d Printer

SLO Library - 3d Printer

Thursday, July 4, 2024 at 9:00am - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Friday, July 5, 2024 at 1:00pm - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Tuesday, July 9, 2024 at 10:00am - 5:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Wednesday, July 10, 2024 at 10:00am - 5:30pm
San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

Event Details:

Please come up to the Children's Area on the 2nd floor of the SLO Library. 

3d Printer

SLO Library - 3d Printer

Thursday, July 11, 2024 at 9:00am - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Friday, July 12, 2024 at 1:00pm - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

Snap circuits

Electronics 101 for Kids

Friday, July 12, 2024 at 2:00pm - 3:30pm
Los Osos Library Children's Area at Los Osos Library
Program Type:
Kids Activities, Family Activities, Science & Nature, Technology Skills
Age Group:
School Age, Tween
Library Branch: Los Osos Library
Room: Los Osos Library Children's Area
Age Group: School Age, Tween
Program Type: Kids Activities, Family Activities, Science & Nature, Technology Skills
Event Details:

What is electricity and where do we get it? What is magnetism? How do circuits work? Learn this and more with demos and small projects with presenter Paul!

3d Printer

SLO Library - 3d Printer

Tuesday, July 16, 2024 at 10:00am - 5:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Wednesday, July 17, 2024 at 10:00am - 5:30pm
San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

Event Details:

Please come up to the Children's Area on the 2nd floor of the SLO Library. 

3d Printer

SLO Library - 3d Printer

Thursday, July 18, 2024 at 9:00am - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Closed
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 0

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Friday, July 19, 2024 at 1:00pm - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Tuesday, July 23, 2024 at 10:00am - 5:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Wednesday, July 24, 2024 at 10:00am - 5:30pm
San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

Event Details:

Please come up to the Children's Area on the 2nd floor of the SLO Library. 

3d Printer

SLO Library - 3d Printer

Thursday, July 25, 2024 at 9:00am - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Friday, July 26, 2024 at 1:00pm - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Tuesday, July 30, 2024 at 10:00am - 5:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Wednesday, July 31, 2024 at 10:00am - 5:30pm
San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

Event Details:

Please come up to the Children's Area on the 2nd floor of the SLO Library. 

3d Printer

SLO Library - 3d Printer

Thursday, August 1, 2024 at 9:00am - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Friday, August 2, 2024 at 1:00pm - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Tuesday, August 6, 2024 at 10:00am - 5:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

3d Printer

SLO Library - 3d Printer

Wednesday, August 7, 2024 at 10:00am - 5:30pm
San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.

Event Details:

Please come up to the Children's Area on the 2nd floor of the SLO Library. 

3d Printer

SLO Library - 3d Printer

Thursday, August 8, 2024 at 9:00am - 4:30pm
SLO Library Children's Area at San Luis Obispo Library
Program Type:
Craft & Design, Technology Skills
Age Group:
All Ages
Open
Required
Library Branch: San Luis Obispo Library
Room: SLO Library Children's Area
Age Group: All Ages
Program Type: Craft & Design, Technology Skills
Required
Seats Remaining: 1

3D Printer: Make an appointment

Have a project you'd like us to print? Here's how to get started:

  1. Check our 3D Printer Use Procedures & Policy. 
  2. Make an appointment to bring your project file to the San Luis Obispo Library Children's department. 

This is a DYI project. Please call the Children's department at 805-781-5775 with any questions. 

This program was supported in whole or in part by the U.S. Institute of Museum and Library Services under the provisions of the Library Services and Technology Act, administered in California by the State Librarian.